calendrier d'événements
Print

PVC pipe and fittings – Buried sewers

Pipe PVC-u

Standard BNQ 3624-130
Unplasticized Poly(Vinyl Chloride) [PVC-U] Pipe and Fittings - Pipes of 150 mm in Diameter or Smaller

Standard BNQ 3624-130 defines the requirements for the dimensions, properties and testing methods for certain pipe that is divided into two categories of rigidity, as well as their rigid fittings, manufactured from PVC compositions and intended to be buried and used for gravity flow wastewater systems. It applies to smooth wall, non-perforated rigid pipe and fittings or nominal diameter equal to or less than 150 mm, equipped with sockets for glued assembly or for dismountable assembly using rubber seal rings. BNQ 3624-130 deals more specifically with sewer pipelines, branch connections and collectors connected to the municipal sewer system, sewer pipelines installed under buildings and effluent pipelines installed outside buildings.

In addition, BNQ 3624-130 applies to perforated pipe with the piercing pattern given in the standard and used for building drainage to reduce the risk of the formation of rust deposits.

  • Download standard
    langue = en
    11171 ANG BNQ 3624-130 Unplasticized Poly(Vinyl Chloride) [PVC-U] Pipe and Fittings - Pipes of 150 mm in Diameter or Smaller
    This new edition supersedes the edition dated September 15, 1997.
    Reapproval (confirmation) project (to Be Published)
    11170 FRN BNQ 3624-130 Tuyaux et raccords en poly(chlorure de vinyle) non plastifié (PVC-U) - Tuyaux d'un diamètre inférieur ou égal à 150 mm
    Cette nouvelle édition remplace celle du 15 septembre 1997.
    Reapproval (confirmation) project (to Be Published)

  • Standards committee members
    Number of committee members : 12
    Marie-Claude BergeronMDDELCC - Direction générale des politiques de l'eau - Direction des eaux municipales
    Stéphane BergeronAssociation des ingénieurs municipaux du Québec (AIMQ)
    Jean-Yves CaronLes plastiques Abénaki inc.
    Alain CazaBéton Brunet
    Claude CouillardVille de Québec
    Jean GingrasCorporation des officiers municipaux et en environnement du Québec (COMBEQ)
    Daniel GrenierCentre de recherche industrielle du Québec (CRIQ)
    Alain LerouxIPEX Gestion
    Marc-Antoine LorangerMinistère des Transports, de la Mobilité durable et de l'Électrification des transports (MTMDET)
    Rowena PatenaudeRoyal produits de bâtiment
    Jacques PharandVille de Montréal
    Christian VézinaNORDIKeau

 

Certification Offer 

Manufacturers may ask the BNQ to recognize the conformance of their pipes and fittings with BNQ 3624-130. To obtain certification of their products, the manufacturers must prove they comply with the standard’s requirements.

General requirements:

  • Requirements related to thermoplastic (PVC)
  • General characteristics of the pipes and fittings
  • Assembly

Special requirements:

  • Dimensional characteristics, including the location and dimensions of the perforations for pipes intended to reduce the risk of formation of ochre deposits
  • Mechanical characteristics (rigidity, crush and shock resistance, tightness of joints and quality of fusion bonding of co-extruded multiple smooth wall pipes)
  • Chemical resistance
  • Solar radiation protection
  • Verification of the PVC extrusion quality of the pipes 
  • Verification of the moulding quality of PVC fittings 
  • Marking and handling

This certification program is accredited by the Standards Council of Canada.

THIS MAY INTEREST YOU