calendrier d'événements
Print

Onsite Residential Wastewater Treatment Technologies

Onsite Residential Wastewater Treatment Technologies

Standard CAN/BNQ 3680-600
Onsite Residential Wastewater Treatment Technologies

The challenge for persons living in isolated dwellings is to establish an effective system for managing water, particularly wastewater. For this purpose, onsite residential wastewater treatment technologies have been developed and must meet specific requirements governing their reliability and conformity to municipal bylaws. The BNQ has therefore developed the CAN/BNQ 3680-600 Canadian national standard based on the methodology of standard NSF 40 for onsite residential wastewater treatment technologies. Similar to standard NSF 40, the CAN/BNQ 3680-600 standard includes a six-month period with limitations and frequent sampling; this period is followed by an additional six months of less frequent sampling to verify the reliability of the treatment system during the four seasons of the Québec climate.

Standard CAN/BNQ 3680-600 establishes the performance requirements applicable to onsite residential wastewater treatment technologies used to treat wastewater from isolated dwellings and specifies the test methods used to verify their performance conformity against the requirements established by regulatory authorities.

It applies to onsite residential wastewater treatment technologies used to treat wastewater from isolated dwellings. It does not establish performance requirements for onsite wastewater treatment technologies designed for water reuse, nor those used for other buildings that may be attached to isolated dwellings (service stations or restaurants).

  • Download standard
    langue = en
    12637 ANG CAN/BNQ 3680-600 Onsite Domestic Wastewater Treatment Systems
    This new edition supersedes the edition dated May 1st, 2009.
    Reapproval (confirmation) project (to Be Published)
    12636 FRN CAN/BNQ 3680-600 Systèmes de traitement autonome des eaux usées domestiques
    Cette nouvelle édition remplace celle du 1er mai 2009.
    Reapproval (confirmation) project (to Be Published)
  • Standards committee members
    Number of committee members : 11
    Miguel AlmassyDBO Expert
    Marie-Christine BélangerPremier Tech Water and Environment
    François BoutinAgat Laboratoires
    Valérie BridgerBionest
    David DobsonMinistry of Municipal Affairs - Government of Alberta
    Anne EganOntario Onsite Wastewater Association (OOWA)
    Stefan FureyDepartment of Environment and Climate Change - Government of Nova Scotia
    Christopher JowettWaterloo Biofilter
    Chris KinsleyCentre ontarien des eaux usées rurales (COEUR), Université de Guelph
    Anibal Jose SchiffinoMinistère de l'Environnement, de la Lutte contre les changements climatiques, de la Faune et des Parcs (MELCCFP) - Gouvernement du Québec
    Derek SmithMinistère de l’Environnement et du Changement climatique - Gouvernement du Manitoba

 

Certification Offer

Marque de certificationManufacturers of onsite residential wastewater treatment technologies have everything to gain by having their products certified since certification is the consumer’s guarantee of quality and reliability. A manufacturer may therefore have its treatment technologies certified under the BNQ certification program specifically created for that purpose. The program is based on the CAN/BNQ 3680-600 standard and the BNQ 3680-900 certification protocol, which specifies the steps that manufacturers must follow to show that they conform to the requirements applicable to the products submitted for certification.

This certification program is accredited by the Standards Council of Canada.

THIS MAY INTEREST YOU